Hoover AM110 won't final spin

[Alerxt]

Hope someone can help . The machine won't go into a final spin on any programme . Checked brushes 10mm at longest point & Pressure switch
tube & bottle all ok any help much appreciated .

 

[breezer]

10mm is a bit short

 

[Alerxt]

10mm is a bit short

i read on another forum site that if they were 6mm to change them ,thats why I thought they were ok. What size are they new ?

 

[breezer]

no idea what so ever.

but usualy 10mm is short, you should also only be measuring the protruding carbon, not the whole thing.

 

[Alerxt]

no idea what so ever.

but usualy 10mm is short, you should also only be measuring the protruding carbon, not the whole thing.

yep thats what I was measuring from the carbon holder to the end of the longest side of the brush .

 

[LaundrySpares&Repairs]

You have checked that the water is completely drain from the machine and the filter is clear, some of the new machines will not spiun if not drained within a certain time, but breezers right for the sake of £2-00 change the brushes.
If the machine is not spinning after this you may be looking at a faulty electronic unit call an engineer.

May sure you turn the mahine off at the wall adn remove the plug if possible.

 

[arcright]

You have checked that the water is completely drain from the machine and the filter is clear, some of the new machines will not spiun if not drained within a certain time, but breezers right for the sake of £2-00 change the brushes.
If the machine is not spinning after this you may be looking at a faulty electronic unit call an engineer.

May sure you turn the mahine off at the wall adn remove the plug if possible.

brushes or module mate!!!
you have some strange repair methods laundry spares or repair!!

 

[Alerxt]

Checked the filter & the operation of the pressure switch ,took the bottle for the pressure switch off the drum checked if it was clear ,so cheapest first............ brushes then see what happens .

 

[Alerxt]

Well update , I've changed the brushes still got the same problem .What's next on the usual suspects list ?