Hoover WE140 won't empty

Joined
13 Aug 2005
Messages
1
Reaction score
0
Location
Southampton
Country
United Kingdom
My Hoover WE140 will not empty. It fills, washes but when it comes to empty (with about 14 mins of the cycle left) it stops. The outlet hose isn't blocked as the water drains under gravity when the hose is lowered. The hose isn't too high as it still won't empty if in a bucket. The filter is clear and I have replaced the pump thinking that to be the problem...but it obviously wasn't!!! Any ideas?
 
Sponsored Links
You could trace the wires from the pump to the circuit board / timer / pressure switch. There may be a broken wire or burnt copper strip on a PCB etc.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top