Hotpoint aquarius WDD750PUK door open flashing on lcd panel. Changed door handle and interlock with new ones. Door open still flashing on lcd and ch

[hurtletoot]

Door open error on hotpoint aquarius WDD750PUK. Worked fine door wouldnt open reached door handle then replaced interlock. Same problem still door open error on lcd also checked brushes but they appear to be fine too. I'm running out of ideas what the problem could ne

 

[Jurassicspark]

Have you checked the wires leading to the pcb? The joints on the pcb?

 

[hurtletoot]

Havent tried hes putting the brushes back in. Icant understand how the machine was working fine washed and spun. The door initially wouldnt open after the wash so we had to manually open the door with string. We discovered the plastic block on the door handle was broken so ordered the new handle fitted it , but the door open error still showed on lcd. Fitted new interlock this evening we thought it would definitely work , were just getting no further. So brushes are fine so what are we looking for with the pcb and where is it allocated thanks again

 

[jj4091]

IT appears there are several different derivatives of your model,

• WDD750PUK (80848600000)
• WDD750PUK (80848600058)
• WDD750PUK (80848600095)
• WDD750PUK (80848600096)
• WDD750PUK (80848600197)
• WDD750PUK58
• WDD750PUK58 (84860)

did you use the correct product code when ordering the parts you fitted.
I would suggest asking Hotpoint if they do a fixed price repair if you come to the conclusion the board has failed as they usually need to be programmed for the the model.

 

[hurtletoot]

IT appears there are several different derivatives of your model,

• WDD750PUK (80848600000)
• WDD750PUK (80848600058)
• WDD750PUK (80848600095)
• WDD750PUK (80848600096)
• WDD750PUK (80848600197)
• WDD750PUK58
• WDD750PUK58 (84860)

did you use the correct product code when ordering the parts you fitted.
I would suggest asking Hotpoint if they do a fixed price repair if you come to the conclusion the board has failed as they usually need to be programmed for the the model.

yes i ordered the correct part as it asked for the serial model so it was the one ending 096 above all from espare.com

 

[securespark]

How many wires are attached to the door switch?

If two, did you try (safely) joining them together and then seeing if the door open fault resolves?

 

[Taylortwocities]

This is an APPLIANCE. You may get additional guidance on the APPLIANCES forum.

Appliances

Problems / questions / issues to do with household appliances e.g. washing machines, dishwashers (NOT boilers).

www.diynot.com