Hi there, door error message started flashing and beeping with 1 minute of a cycle left. Checked round door seal and catch nothing obvious. Ended cycle, but now can't get machine to start again, Door is def shut but door message just keeps flashing. Any ideas? cheers Ian
Hotpoint Aquarius WMF740 - Flashing Door message ?
- Thread starter Moffman
- Start date
Sponsored Links
Had similar problem. Fixed by: Remove unit from under bench. Unplug power plug from socket. Remove plastic filter cover and four screws from back of unit cabinet. Facing the rear of cabinet, find wires connecting to circuit boards on lower left of unit. Unplug smaller plug with red and brown wires (only). Reset again (can spray terminals with non-residue electric cleaning spray if you wish). Put plastic and screws back on. Plug electric power socket back in. Try running unit. 'Lock' light on front panel should come on. Washing sequence should begin. If successful, move unit under counter etc. If not working, possible faulty solenoid or switch.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
