hotpoint ariston lft114 look dead

[subsonic]

Hi to all. I own a hotpoint ariston lft 114 dishwasher for 2 years. I was working properly and one day suddenly it just stopped. No LED flashing no nothing. I used a voltage meter and I measured the power after the fuse that it has after the cable and before the circuits and it sems that power is going to the maschine. Any idea of the problem???

Thanks in advance

 

[rocks1]

Check the Pcb for burn marks

 

[subsonic]

thats what i was thinking about. or maybe the display board. if it has no burn marks, can i see if it is burn with a voltage meter?

 

[rocks1]

No burn makes are visible.

 

[subsonic]

thanks. I will try to open it tomorrow morning

 

[subsonic]

All done. The problem was at the pcb. A resistor receiving power from the mail supply and feeding the PCB was burn. I replaced it and now it seems working (at least the LEDs are working, the power button too and I can select a program). Havent done any full wash cycle yet because of another problem I found. check here:
//www.diynot.com/forums/viewtopic.php?t=267065&start=0&highlight=