Hotpoint Dishwasher DWF40 Door wont latch

[Diyisfun]

Hotpoint Dishwasher DWF40 Door wont latch.
Is this a diy fix?
It looks like the door inner panel is held together with a few screws.

Thanks

 

[rocks1]

Yes a easy job new door latch is all cost less than a tenner

 

[Diyisfun]

Yes a easy job new door latch is all cost less than a tenner

Rocks1..thanks for prompt reply
Do you have a link for a supplier & a part number.
Also
It just a case of removing the inner panel?

 

[rocks1]

http://www.hotpoint-spares.co.uk/door-lock-for-fdw60p-p-67826.html yes easy just take screws out of consol panel and lift forward , same part for various models

 

[Diyisfun]

Rocks1
Many thanks, I have ordered the part, The part that is broke is a 1p spring.

 

[Razimode]

Am a new boy to this forum ..... and I have exactly the same problem with needing to replace the door lock on a DWF40.
However, I've removed the top 4 screws in the door at the rear of the switch panel, but just cannot undclip it/separate so that I can get access to the lock in the rear of the switch panel. It just does not seem to want to unfix itself.
Any suggestions please

 

[Diyisfun]

What about the 4 screws down each the side.
====
Order Number: 33340Date Ordered: Monday 24 May, 2010Products------------------------------------------------------1 x DOOR LOCK for FDW60P (C00094128-FDW60P) = £8.80------------------------------------------------------Sub-Total: £8.80Flat Rate (Best Way): £3.95VAT + Export: £1.15Total: £12.75