hotpoint wm63 door help please

[vickylou67]

I am replacing the door hinge on my Hotpoint Aquarius 1100 WM63. I removed the old hinge (v simple!) and now need to get to the bit in the door that holds the hinge. I have removed all 3 screws on the inside of the door but the door has not come apart. Any hints? I don't want to break anything! Thanks

 

[rocks1]

door does split use a flat bade screwdriver and prise open ,then put the hinge on and then hold door with all att to the front panel of the mc and screw the 2 screws back on .

 

[vickylou67]

Many thanks for this! Although it was a butter knife rather than a screw driver....... Now all i need to do is find a way to remove the metal piece of old hinge that's wedged inside one of the plastic hinge holders. Any ideas or is it brute strength and ignorance?

 

[rocks1]

use a fork prong to push it out one end is small one is slighty bigger .