Hi,
During a recent power cut my Hotpoint WMA36 Washer was stopped midway through a wash. The wash cycle wouldn't restart or could be reset.
Since this time the Door Locked light flashes on all cycles. On the advise of the forums, I've removed the detergent tray, front panel and have taken a look at the PCB.
It appears there is discolouration around what appears to be a relay (TR1) and a capacitor (C6) both on the component side of the board and on the circuit side.
Do you have any advise as to what measures I should next take?
Many thanks
James Chapman
During a recent power cut my Hotpoint WMA36 Washer was stopped midway through a wash. The wash cycle wouldn't restart or could be reset.
Since this time the Door Locked light flashes on all cycles. On the advise of the forums, I've removed the detergent tray, front panel and have taken a look at the PCB.
It appears there is discolouration around what appears to be a relay (TR1) and a capacitor (C6) both on the component side of the board and on the circuit side.
Do you have any advise as to what measures I should next take?
Many thanks
James Chapman
