Hotpoint WMA66 Please help

[debsyweb]

Can someone please help or advise.My hotpoint washer starts off fine but won't stop filling with water.I then have to push forward button to get it to empty.My washing pile is getting seriously high.I have only had this machine around 15 months.
Thankyou in advance

 

[fido]

The water level is controlled by a pressure switch mounted near the top of the machine, which is connected via a thin hose to a pressure vessel incorporated in the sump outlet plumbing at the bottom of the tub. It is possible that the pressure vessel is choked or the hose might have rubbed on something and have a hole in it.

 

[debsyweb]

Thankyou so much for you reply I will have a look straight away!!

++++++++++++++++++++++++++++++

The back does'nt come off or the top.the only way I can get in is by a small white plastic part that comes off.I see the thin hose but can't get to it.Is there another way to get to it?
Many thanks to you
++++++++++++++++++++++++++++

Thankyou so much WASHER IS FIXED!!!!!!!!!!!!!!!!!!!!!!!
The tube had just come off,put it back on and hey presto.
Once again my many thanks
________________________________
moderator

please note 10 a, forum rules