Washing machine is only 17 months old - now i have a rapidly flashing on/off red light and a flashing LED light for easy iron. When I switch on machine it seems to work as normal but after taking in a bit of water it goes directly to drain and then these two light start flashing. Any suggestions!!!!
how can I fix problem with Indesit Washing Machine Wixl 163
- Thread starter momollie
- Start date
Sponsored Links
- Joined
- 30 Apr 2008
- Messages
- 6,137
- Reaction score
- 1,045
- Country
--------------------------------------------------------------------------------
f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board
So in this instance with the second light flashing the error code would be f04 light 2. pressure sw stuck on empty . new pcb needed try here http://www.emwelec.co.uk/
f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board
So in this instance with the second light flashing the error code would be f04 light 2. pressure sw stuck on empty . new pcb needed try here http://www.emwelec.co.uk/
Hi I have a wixl163 which is lighting the extra rinse light which I would read as the fourth light as next to door lock light which keeps flashing would this be a triac fault if so does anyone know which triac I need to replace and where it is? The symptoms of the fault are the machine fills then pumps out all the water but keeps trying to pump even though all the water has emptied. I hd been told it was the pressure switch checked that by replacing with an identical pressure switch. Cleaned out pipe and pressure switch input
Sponsored Links
Hi All
I have the following lights that continually flash rapidly
and the machine fails to work at all
delay timer
stain removal
easy iron
extra rinse
door lock
and
9h
HELP !!
Read more: //www.diynot.com/forums/appliances/indesit-wixl-123-lights-flashing.407362/#ixzz38f3Qwp1D
I have the following lights that continually flash rapidly
and the machine fails to work at all
delay timer
stain removal
easy iron
extra rinse
door lock
and
9h
HELP !!
Read more: //www.diynot.com/forums/appliances/indesit-wixl-123-lights-flashing.407362/#ixzz38f3Qwp1D
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
