Ignis ADL 350 Dishwasher does not start

[jmenziessmith]

Hi,

I have an Ignis ADL 350 dishwasher (the built in kind) which has been in the flat I just purchased for 2 years. However i am told it was never used / never worked.

The power comes on when I press the on / off buttons on the left hand side of the door controls.

However the select & start buttons do not have any effect. When i press the select button, the light does not scroll along to select mode, and pressing the start button doesnt do anything either.


Does anyone have any idea what could be causing this?

Thanks

 

[zipper]

This machine is produced by Whirlpool.
Try to reset it by pressing & holding down the start button for at least 3 seconds (while switched on). If it doesn't reset then the pcb is likely shot.

 

[jmenziessmith]

Thanks for the reply. Holding buttons down has no effect. Do you know where i can order a replacement pcb?

thanks

 

[zipper]

Post the 12 digit service number on the door sticker (starts with 85) & I'll link you to spares.

 

[jmenziessmith]

thank you really appreciate it


8545 350 15811

 

[zipper]

You may have to pawn the family silver
http://www.espares.co.uk/parts?k=481221838591