Indesit Dishwasher door seal

[tonibr]

Hello all,
I have an Indesit DG6145 dishwasher. The metal moulding which holds the door seal in place has come loose on the lefthand side and top. It looks like it should be held in place with spot welds. Any suggestions about securing it back in place, please?
TIA
Toni

 

[Sleepyhead]

Indesit used to do a repair kit for this, maybe still do.
Consists of a drill bit, small self tappers and a tube of sealant.

 

[tonibr]

Thanks, Sleepyhead. I have those sorts of bits and pieces in my modelling kit (model airplanes!) I'll dig out a selection and have a go. The fact that such a repair kit exist means that it is a known fault and therefore no big deal.
Thanks again
Toni

 

[tonibr]

All fixed. No further problems.
Thanks
again
Toni

 

[alro]

All fixed. No further problems.
Thanks
again
Toni

did this fix the problem long term?