Hi there
Ive got an Indesit washer dryer IWDE12 that isn't heating the water properly.
The water is heating up but not getting hot enough.
If I put it on a hot wash the water only gets luke warm before the rinses begin.
Is it most likely to be a board fault or am I best changing the heat element sensor first?
Ive got an Indesit washer dryer IWDE12 that isn't heating the water properly.
The water is heating up but not getting hot enough.
If I put it on a hot wash the water only gets luke warm before the rinses begin.
Is it most likely to be a board fault or am I best changing the heat element sensor first?