Indesit WD 105 T

[Annalisa]

Even my washer-dryer (Indesit WD 105 T) has the same problem...
When I try to start washing, the programme selector knob starts turning and turning...
Usually, after one or two attempts, the machine accepts the programme and in the end works. This time I just can't make it work!

The number of flashes between pauses, in my case, is 8.

I hope you can help me.
Thank you!
Annalisa
_____________________________
lynda, moderator

your post has been split (forum rule 20) hi jacking a post only casues confusion

 

[Sleepyhead]

It's a heating fault. F8 = heater relay cannot be activated.
Heater relay is on main pcb. If Pcb is to be replaced can be quite expensive repair.

 

[Annalisa]

Thank you, but now - incredibly- tha washer-dryer is working!!

This afternoon, after posting here, I've made my last attempt...
Before re-programming the machine, I selected one of the symbols stop/reset and I left it switched on the reset mode, not just for few minutes, as I did many times before, but for more than a hour.

I hope my experience can help somebody else.
Bye
Annalisa