Indesit WD12S washer dryer problem

[P.J.]

Hi,

My washer dryer is playing up.

When I switch it on and select a cycle the led flashes three times quickly then stays on and the door locks. But then nothing happens, no wash and no dry. This is the same for all programs.

The water supply is on and I've also replaced the main board at the back and the problem remains the same with old and news boards.

When I start a cycle the led flashes 3 times quickly, then stays on and the door locks but no fill, drum turn, cycle or anything. If I move the selector to the end of cycle black dot, the led flashes three times quickly then flashes slowly and eventually the door unlocks.

Any ideas would be greatly appreciated.

Thanks in advance,

Paul.

 

[fido]

Check the motor brushes. It may be detecting a fault and shutting down.