Really stuck here. After cycle door would not open leaving all of the clothes stuck inside. Is there any way of manually opening the lock from the inside as the machine is part of a fitted kitchen and I really want to avoid having to get all of the pipes out as they are behind other units and appliances. Thanks
Indesit WD12x door won\\\'t open
- Thread starter BLONDIE100
- Start date
Sponsored Links
The door may be jammed because the machine has not drained all the water out?
Try a spin/drain cycle & then wait a couple of minutes. If it hasn't drained then the easiest way to drain it manualy is to put the drain hose (Grey flexible) into a bowl on the floor and let the water syphon out.
Once drained the door should open, you then need to check the filter for a blockage.
Good luck!
Try a spin/drain cycle & then wait a couple of minutes. If it hasn't drained then the easiest way to drain it manualy is to put the drain hose (Grey flexible) into a bowl on the floor and let the water syphon out.
Once drained the door should open, you then need to check the filter for a blockage.
Good luck!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
