INDESIT WIDL126 FAULT CODE F09 FLASHING 1-4 HELP!

[girgs]

Hello!

I have a INDESIT WIDL126 washer dryer just over 3 years old, I have been reading forums and traced my problem to fault code F09 - Eprom/set up error the lights 1-4 flash when my washing reaches the end of its cycle. if I turn the washer off at the plug it will stop flashing and wash but wont spin and a 30 min cycle takes hours then the fault lights flash again.

I did all the usuals took out filter + cleaned, checked hose ect ect.

A man came out and took one look and just said 'computers gone scrap it' (thankfully he didnt charge me for the call out!)
but after a little reading online I am thinking all may not be lost!

So I know the fault but I dont know how to fix it... any sugestions?

Thanks in advance!

 

[rocks1]

F09 is EPROM set up corrupt . New pcb required send it to emw for a recon cost 40 quid nothing u can do. Only thing I can say is make sure connections are tight on the pcb if it still happens pcb gone west.