inlet flange desperately need for ideal elan

[ianb74]

looking for an 0.5 inch straight inlet flange for a honeywell nv4700 gas valve(green button)
honeywell flange part no 45.900.400-106
its to fit a stelrad ideal elan boiler
CF 55 - GC No. 41407 94
ive tried loads of places and cant get one
surely there must be one lurking somewhere
hope someone can help
thanks in advance

 

[Agile]

You are clearly very good with parts numbers but I am not!

Can you post a picture of it?

Whats wrong with it ?

Tony

 

[doitall]

Still thinking about this.

The CF55 41 407 94 used the Honeywell 1049 valve pt/n 078560


The 4700e was used on the classic and others but not the elan as far as I know.

In any case the inlet manifold is part of the replacement gas valve, with the union nut.

 

[namsag]

No its not , its part of the boiler and was usually attached to gas valve with 4 screws and an O ring

Have a look around the local scrappy is about the only chance

 

[doitall]

No its not , its part of the boiler and was usually attached to gas valve with 4 screws and an O ring

Have a look around the local scrappy is about the only chance

Are you thinking of the gas manifold, the bendy bit of tube..

He did say inlet and not outlet.

 

[ianb74]

Still thinking about this.

The CF55 41 407 94 used the Honeywell 1049 valve pt/n 078560


The 4700e was used on the classic and others but not the elan as far as I know.

In any case the inlet manifold is part of the replacement gas valve, with the union nut.

youre right mith the valve,thats the one i ordered but it doesnt come with inlet flange with the four screws and o ring

 

[ianb74]

No its not , its part of the boiler and was usually attached to gas valve with 4 screws and an O ring

Have a look around the local scrappy is about the only chance

youre right mate,it doesnt come with the gas valve as ive bought one and it aint there,the inlet split when when refitting

 

[doitall]

The Honeywell 1049 gas valve as used on the Elan CF55

View media item 6131

 

[namsag]

Thats the one DIA and the bit attached to the gas valve on the left with the union is not part of the valve and does not come with it.
The valve is attached using 4 screws and O ring on either side

 

[gas4you]

Whats wrong with your old one? Never, yet, had a problem with these

Shame I took out an Elan 10 days ago and dumped it

 

[namsag]

He says it split dave

 

[gas4you]

Didn't read that far down

 

[doitall]

Would have thought almost any Honeywell would fit that, I'll have a dig.

 

[namsag]

DIA i think you will find the part has nothing to do with honeywell its part of the boiler it just happens to be attached to the gas valve,

 

[doitall]

What I was saying is it's probably a generic part that fits all Honeywell gas valves of that era.