Kitchen fittings / cabinetry

[Sgt Bilko]

Not sure if this belongs in this, but here goes.

Earliler in the year i installed an MFI kitchen (Rimini).

Recently we have had the boiler changed, and i had kept hold of all the bits of spare wood and panels, screws and cosmetic screw plugs etc for this.

However, on boxing in the boiler i realise i am short 4 plugs to cover the screws. Does anyone know where i can get hold of these at an inexpensive price?

They are roughly the same colour as the photo, about 1cm face/head with 7mm plug width

 

[big-all]

these things !!!!!
http://www.toolstation.com/search.html?searchstr=35069

the picture shows the dark brown

 

[Jasonb]

BA, think he wants ones to plug a 7mm hole not a screw head.

Thre this site http://shop.comdir.co.uk/Products.aspx?intGroupID=947

Jason

 

[Sgt Bilko]

BA, think he wants ones to plug a 7mm hole not a screw head.

Thre this site http://shop.comdir.co.uk/Products.aspx?intGroupID=947

Jason

Yes, there are the ones:
http://shop.comdir.co.uk/Products.aspx?intGroupID=947&strProductID=dcnxkgeksa&strWebTemplate=C

Although not sure on those finish codes and don't really need 100!

 

[Sgt Bilko]

Whoops, fixed the URL now. Any suggestions?

 

[Jasonb]

The NAT refers to uncoloured plastic, so not what you want.

Does the 7mm part fit into a hole in the wood or a hole in the top of the screw?

Jason

 

[Sgt Bilko]

The NAT refers to uncoloured plastic, so not what you want.

Does the 7mm part fit into a hole in the wood or a hole in the top of the screw?

Jason

The 7mm fits into a pre-drilled hole in the wood. Underneath there is a screw, but it will not come into contact with the cap. (recessed by about 4mm)

 

[Sgt Bilko]

:BUMP: Any advice folks? Any kitchen fitters on here?