Hi all,
I need some advise on joining various appliance wastes together.
Background to my problem:
I have a problem under my kitchen sink. Previously there was a washing machine into the trap, all worked well, no concerns.
However I have now added a dishwasher so need a T / Y piece connection from the 30mm washer waste pipe to join the 25-32mm dishwasher waste that then goes off into the trap as one.
But because of the dishwasher location the waste pipes are at full stretch and wont reach the trap. The solution for this is a flexible extendable waste but these just have plain spigots on the end that wont take standard 32mm or 40mm pipework.
Request:
So basically I need a T piece with a 30mm, 25-32mm and a 32mm ends. I have seen rubber connectors with jubilee clips that would do the job but they are all around 17-19mm, nothing in the 30mm range.
Any ideas where I can find such a piece?
Thanks all
I need some advise on joining various appliance wastes together.
Background to my problem:
I have a problem under my kitchen sink. Previously there was a washing machine into the trap, all worked well, no concerns.
However I have now added a dishwasher so need a T / Y piece connection from the 30mm washer waste pipe to join the 25-32mm dishwasher waste that then goes off into the trap as one.
But because of the dishwasher location the waste pipes are at full stretch and wont reach the trap. The solution for this is a flexible extendable waste but these just have plain spigots on the end that wont take standard 32mm or 40mm pipework.
Request:
So basically I need a T piece with a 30mm, 25-32mm and a 32mm ends. I have seen rubber connectors with jubilee clips that would do the job but they are all around 17-19mm, nothing in the 30mm range.
Any ideas where I can find such a piece?
Thanks all
