Leveling my floot

[gas01]

I have a floor to make level before I lay my laminate flooring, as I have pulled up the existing laminate and the floor is not 100% level.

I know this is a DIY place but is there anyone local that wants to do this for me ?

I'm in Camberley Surrey.

Thanks

 

[WoodYouLike]

How not level is your not level floot? Minor, major?

 

[gas01]

When I run my hand over the floor, in a few places there are bumps probably 2-3mm in a few places.

Thanks

 

[WoodYouLike]

Can you sand/chissel them off? If it's only very locally and not whole areas that might do the trick.
A floor doesn't have to be 100% level to install a (floating) wooden floor, there can even be a sloop of not more than 3mm per meter.

 

[gas01]

I'll give it a go, what sand paper would I use for concrete ?
Thanks

 

[masona]

When I run my hand over the floor, in a few places there are bumps probably 2-3mm in a few places.

Thanks

That's normal I wouldn't worry too much but if you want 100% level then use floor leveling compound. The underlay will override the 2-3mm anyway

 

[2scoops0406]

Can you sand/chissel them off? If it's only very locally and not whole areas that might do the trick.
A floor doesn't have to be 100% level to install a (floating) wooden floor, there can even be a sloop of not more than 3mm per meter.

slooping floots ? whatever next!