Levelling Spacer question

[Ydraiggoch]

Hi,

I'm about to start tiling a patio measuring 6m x 7m with 600 x 900mm porcelain tiles.
I was thinking of using the leveling spacers for this job (with the screw top heads).
My plan is to lay the tiles by working one row at a time. I'm not the most experienced of tilers, so intend to take my time with this job. So, I'll be happy if I'm achieving 2 rows a day! With this in mind, how would I use these spacers against the edges of the tiles laid the previous day if the bed has gone off the day before? Do I set them against the edge of the tile that I finish on (for that day) and use it for the next tile the following day? If so, will there be any adjustment in this if it's set in the mortar from the day before?

Apologies if this is a dumb question!

 

[yorksbuilder]

Do I set them against the edge of the tile that I finish on (for that day) and use it for the next tile the following day?

Yes

 

[OvertonPlumber]

Just be careful there's no mortar exess as it may stop your next row going in on the right spacing. I've just used the spinners but I think I prefer the wedges. As the spinners snap the clip. If you really torque them up.