I recently fitted a second hand radiator I acquired a few years ago. It's all working fine but has a valve I don't really recognise. I see the built in drain cock but I'm not to sure about the lockshield part - I don't want to mess with it but presume it's fixed rather than adjustable, or is there something under that cap? It has a trv on the other end.
Lockshield valve?
- Thread starter cdbe
- Start date
Sponsored Links
Yes, under the cap, valve adjustable with a hex key.
I have those with my Danfoss Ras-d2 TRV's
- Joined
- 24 Oct 2020
- Messages
- 3,426
- Reaction score
- 1,169
- Country
One of these with a drain off added to the right
Danfoss Angled Radiator Valve Lockshield Nickel 8mm / 10mm 003L020400 | eBay
Colour: Nickel. Radiator:1/2". Manual locksheild valve angle. PICK UP OPTION. Pick up procedure is as follows Utopia Origins Quatro Floor Standing Cloakroom Unit with Washbasin in Drift (400. Utopia Origins Quatro Wall Hung Cloakroom Unit with Washbasin in Drift (400mm) D. ).
www.ebay.co.uk
Links in this post may contain affiliate links for which DIYnot may be compensated.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
