Low hot water pressure

[jwilliams]

My friend's flat has a hot water cylinder at floor level in an airing cupboard next to the bathroom. The water is heated by an immersion heater.

Hot water pressure is adequate in the bathroom, but by the time the water reaches the kitchen the pressure is too low to be useful.

What could be done to increase the pressure? Ask if you need any more details

TIA

 

[ChrisR]

Kitchen on a lower floor?
Check the tap isn't blocked with rust/scale. Or it might be one designed for higher pressure than you have.

 

[jwilliams]

Kitchen on a lower floor?

It's a flat, kitchen's on the same floor.

Check the tap isn't blocked with rust/scale. Or it might be one designed for higher pressure than you have.

It's a new tap, so I'll check what pressure it's designed for. Thanks.

 

[john1971]

was piggy backing your post with a similar one but did a post instead, sorry