Low Pressure - Valient Ecotec 630

[jklondon]

Hi, bank holiday and of course boiler packed up, getting f2.2 error low pressure. I used to have one of these in my old flat with knobs at the bottom that you could turn for inflow/outflow but not sure what to do here - seems the installer forgot to install something here right?

Anyway from the picture of the inflow what do I turn 1,2,3?

Thanks very much guys.

 

[jklondon]

picture

https://www.dropbox.com/s/btubhpfwrd8kbpy/boiler_2.png

 

[picasso]

Not 1,2 0r 3, you will have a filling loop usually its under the boiler or near the hot water cylinder, it should look something like this.

Untitled

• picasso
• 10 Oct 2010
• 6

 

[mickyg]

you need to find a regular filling loop, it might not be near the boiler. Use the - button to see what the pressure is, the dial guage is unreliable.

 

[jklondon]

Thanks but cant find anything like that nearby taken another shot of the inflow/gas/outflow pipes

https://www.dropbox.com/s/ce5r6cas4cvqu7g/IMG_20130401_102100.jpg


in my other valient there were two knobs you could turn by hand which I assumed were from inflow outflow to open up the pipes, this always sorted out the issue.

 

[picasso]

Your old boiler was probably a combi, like I said before look near the hot water cylinder but it could be anywhere on the system.

 

[jklondon]

Lost more pics of system if anyone can help

https://www.dropbox.com/s/822gzhbenlu2b26/IMG_20130401_120820.jpg

https://www.dropbox.com/s/4q83nbq6w1iljfx/IMG_20130401_120846.jpg

 

[GasBod]

Lost more pics of system if anyone can help


https://www.dropbox.com/s/4q83nbq6w1iljfx/IMG_20130401_120846.jpg[/QUOTE] the filling loop is the flexi hose in pic

 

[picasso]

Should have gone to specsavers FFS