M90E 24S: Too much pressure

[peanut321]

Hi everyone

We have a BIASI M90E 24S boiler at home. Tried to turn on the central heating yesterday only for it not to turn on. There was also no hot water, as the pilot wasn't turning on. I checked the pressure gauge and it seemed higher than usual.

http://tinypic.com/r/e6vjab/8
http://tinypic.com/r/x3g4mt/8

Is there any way for me to reduce the pressure?

 

[ChrisR]

Bleed water out of a radiator - cloth, bowl...

But that won't be why your boiler isn't starting now. You need a boiler man, or a manual at least.

Did the pressure go to zero?
(Check the filling loop is closed and there's no water coming out of the pipe which goes out therough the wall)

 

[peanut321]

Bleed water out of a radiator - cloth, bowl...

But that won't be why your boiler isn't starting now. You need a boiler man, or a manual at least.

Did the pressure go to zero?
(Check the filling loop is closed and there's no water coming out of the pipe which goes out therough the wall)

Seems that the diverter broke down. It doesn't turn on properly and there's a squeak sound that comes with it from the boiler. Sucks that it is down now over Christmas, no one is going to come for a repair until next week