Megaflo, turn immersion on?

[robatwork]

Hi,
I have a megaflo indirect tank 300i and a system boiler. The boiler has a fault and is awaiting a part. I thought the boiler had an immersion built in but water is cold. How do I turn the immersion on?
Thanks

 

[Deleted member 267285]

If it’s got one installed and wired up, usually via a switch in close proximity of the immersion (at the cylinder).

 

[robatwork]

Would i need to unscrew the grey cover off?

 

[Harry Bloomfield]

Would i need to unscrew the grey cover off?

Is there a cable coming out of the grey cover?

Perhaps upload some photos?

 

[muggles]

Some photos of it would help no end here

 

[Deleted member 267285]

Would i need to unscrew the grey cover off?

Not usually no. As per others, if you’re unsure post some photos of the cylinder and immersion arrangement

 

[robatwork]

Hate it when threads never get finished so...thanks for the replies and you were all on the right lines. Turns out with some professional help that it wasn't actually wired up. There was a switch next to the tank with power, but no cable to the tank. There is now though. I realise my OP was wrong as well and I meant the Megaflo having an immersion.