Hello,
I moved some months ago to a new home and there was a Menvier TS900 alarm installed 20 years ago. The previous owner didn’t use the system so he took all batteries out and left it like that. The company who installed the system doesn’t exist anymore and no other company wants to help or I have to buy a new system. When I started up the system following message was displayed on the LCD remote keypad: “AUX/BELL TAMPER” and I’m unable the activate “full set” the system. I suppose the reason why the system cannot be activated is the error message.
What I already did to try to resolve this issue:
Can somebody help me to bring this system back to life? Thanks.
I moved some months ago to a new home and there was a Menvier TS900 alarm installed 20 years ago. The previous owner didn’t use the system so he took all batteries out and left it like that. The company who installed the system doesn’t exist anymore and no other company wants to help or I have to buy a new system. When I started up the system following message was displayed on the LCD remote keypad: “AUX/BELL TAMPER” and I’m unable the activate “full set” the system. I suppose the reason why the system cannot be activated is the error message.
What I already did to try to resolve this issue:
- First I did a password reset of the system after finding all user and installation manuals to be able to enter the system as a engineer
- Installed a new battery for the TS900
- Installed new battery in the external bell box (TL500M)
- Tested the bell using bell test function and the bell works fine
- The tamper wire of the bell is directly linked to the TS900 on AUX TAMP, I removed the wires from the TS900 but no results.
Can somebody help me to bring this system back to life? Thanks.
Last edited: