Mixed size mosaic glass tiles - wall sockets

[poenneby]

Hi

I'm planning to tile from worktop up to half the wall in the kitchen with 30x30cm sheets of mixed size and mixed colour mosaic glass tiles.
The sheets each contain 3 different shapes of glass tiles:
- 5x5cm
- 2.5x5cm
- 2.5x2.5cm

We've got a few wall sockets in this space and I can't figure out how to make this look good.

Should I try to move the sockets so they fit a hole in a sheet?

Any advise greatly appreciated!

Many thanks
Peter

 

[jefoss]

what size you tiling?

and to be honest ive never heard of anyone shifting sockets to fit tiles in....

 

[poenneby]

what size you tiling?

and to be honest ive never heard of anyone shifting sockets to fit tiles in....

The area I'm tiling is roughly 60Hx225W

 

[jefoss]

what size you tiling?

and to be honest ive never heard of anyone shifting sockets to fit tiles in....

The area I'm tiling is roughly 60Hx225W

right so its not that big, cant you out your diff patterns out on the side to sort it out?

 

[welshy901]

if the mosaics are on a sheet peel them off enough to put straight on wall and come back the sockets at the end unscrew sockets and cut tiles so the fit just behind the edge of sockets give it 24 hours the rescrew and grout thats the best looking result you will get

 

[bathstyle]

Welshy, feel free to answer threads that come up but don't dig up threads that are over a year old. Otherwise I shall send you the DIYnot Vagisil T-Shirt in the post

 

[Richard C]

Oh another one