Can someone email me a circuit schematic for F&P GWL11 PCB washing machine?
There was no light nor LED display nor nothing when turn on. New module cost about $200. (GWL11HK - SD11 420092, 230V)
Machine was 4yrs old and out of warranty.
Upon opening up the brown motor control module, I found a soldered-on TR5 fuse (TR5-372, 4A 250v) blown but another smaller fuse (TR5 -1A 250v was ok).
Replaced the blown fuse with a replaceable plugged-in TR5. Still no power.
Checked all resistance rating - pump, stator, inlet valves, thermistor, lid lock and OOB - all within tolerances.
Read on another blog about a HexFET IRL3033 (-30V, 4.6A, 0.031R) that was burnt due to possible overload.
So before I go further into the circuit, a schematic will be much appreciated - thanks in advance.
There was no light nor LED display nor nothing when turn on. New module cost about $200. (GWL11HK - SD11 420092, 230V)
Machine was 4yrs old and out of warranty.
Upon opening up the brown motor control module, I found a soldered-on TR5 fuse (TR5-372, 4A 250v) blown but another smaller fuse (TR5 -1A 250v was ok).
Replaced the blown fuse with a replaceable plugged-in TR5. Still no power.
Checked all resistance rating - pump, stator, inlet valves, thermistor, lid lock and OOB - all within tolerances.
Read on another blog about a HexFET IRL3033 (-30V, 4.6A, 0.031R) that was burnt due to possible overload.
So before I go further into the circuit, a schematic will be much appreciated - thanks in advance.