Hi, I know this has been addressed previously but I fitted a monobloc mixer tap for the bathroom basin. it stated for "high and low pressure"
my hot is low pressure from the tank and cold is high pressure. The hot is dribbling out and cold is blasting out. I tried turning down the isolater valve on the cold to even it out but still the same. The pressure seems ok when the pipe is opened and held over a bucket.
should I:
fit a pressure reducing valve to the cold pipe
or: change the flexi pipes to copper
or: change taps to another brand ( B&Q Swirl Essential currently) . please advise on any decent manufacturer so i can fix this first time.
thanks for any input.
my hot is low pressure from the tank and cold is high pressure. The hot is dribbling out and cold is blasting out. I tried turning down the isolater valve on the cold to even it out but still the same. The pressure seems ok when the pipe is opened and held over a bucket.
should I:
fit a pressure reducing valve to the cold pipe
or: change the flexi pipes to copper
or: change taps to another brand ( B&Q Swirl Essential currently) . please advise on any decent manufacturer so i can fix this first time.
thanks for any input.
