New Toilet - Old House - Connection advice needed please

[thebogfrog]

Hi all

Hope you can help. My other half and me are re-doing the bathroom (with alot of help from old posts on here might I add) and we need some help with the Loo connections.

We have a new close coupled loo which has the outlet at approx 190mm to centreline from the floor however the waste pipe to the stack is 90mm centreline from the floor.

We have looked at a flexible adapter but they all seem to be too long for the distance we need to cover (we just don't think we'll get the angle).

Is there anything on the market that will allow quick conversion from new loo to old waste pipe...?

 

[Alz0r]

Have you tried an offset pan connector?

http://www.screwfix.com/search.do;j...tton.x=0&searchbutton.y=0&searchbutton=submit

 

[Hugh Jaleak]

What is the pipe its going into made from, and is it going into a stack?

 

[seco services]

you need an offset pan connector.
see if i can find the code for it.

 

[seco services]

Have you tried an offset pan connector?

http://www.screwfix.com/search.do;j...&searchbutton.y=0&searchbutton=submit[/QUOTE]

thats not large enough offset its the bigger one needed.

 

[Alz0r]

whatever you're just bitter i got there first

 

[thebogfrog]

Looked at offset joints - biggest one we can find was 40mm offset - we need something approaching 100mm.

The pipe is going into a lead pipe through the wall (110mm OD) into a cast iron stack., We had thought of rebuilding the stack however it runs through the conservatory roof boxed in, in the conservatory so not really a viable option

 

[seco services]

yes their is one i find the pt n0

 

[Alz0r]

is there any room to cut the lead right back to the wall, so to allow length for a flexi connector?

 

[seco services]

heres the one you need with 4" offset.

 

[thebogfrog]

we can cut the lead back but we've estimated we have only about 7 - 8 inch and most of the flexi's we have seen are coming in at 10 inch minimum

 

[thebogfrog]

Oooooooo Seco that looks good where can we get one - or at least have a look so we can make sure it fits??????

 

[seco services]

Oooooooo Seco that looks good where can we get one - or at least have a look so we can make sure it fits??????

cause it will fit.
you have 190mm pan centre
90mm waste centre giving you 4" difference.
have faith.
this is the Multikwik 100mm Offset WC Connector - MK0100


heres a link but take the code to your local plumbers merchant and they'll get you one.

 

[Hugh Jaleak]

Ive never seen one of them before!! Interesting, always handy to know. No issues with it blocking I presume?

 

[thebogfrog]

Thanks very much Seco got one ordered for pick up tomorrow - If it don't fit I'll be back on here to give you my address and you can come round and show us how its done lol..... .....Many Thanks again