Nexus alarm hell!!

[Jutopia]

Hi this is probably a basic question but hey ho...my nexus 8 alarm is currently flashing between bt and rr now this may have something to do with the fact that the internal box was disturbed!! does anyone no how to reset a bell tamper as I've entered the code to reset and nowt happens

 

[caretech]

If the fault is still there it wont reset. You will need to clear the bell tamper or link it out.

Hope this is of some help

Grahame

 

[joe-90]

On many panels 'rr' means engineer reset required.

 

[Jutopia]

This is where my "blonde gene" kicks in!!!....how do I clear the bell tamper do I open the panel box. that I banged into[/u]

 

[joe-90]

Like he said you have to link it out .

 

[mattylad]

Try searching for Lintek or Protec fire detection (same building/same companies).

They should be able to tell you.

Or RTFM.
http://www.lynteck.co.uk/Lynteck PDF's/instructions/NexusEngineerManual.pdf

 

[caretech]

On the bottom of the pcb left hand side is says BELL/STROBE.
The 2 terminals on the left marked TPR and -HOLD. Link these together. That will link out the bell tamper.

 

[caretech]

Untitled

• caretech
• 9 Sep 2010
• 1