Nissan Micra spark plugs

[redpike]

Micra E 1.0 litre, 2004
How do you access the spark plugs to change them? Just what has to be removed?

 

[Stivino]

Pull the plugs leads out of the top of the rocker cover. Then use a deep 16mm socket to remove the plugs.
http://www.sparkplugs.co.uk/pages/pricing/ccp/NGK-cars-ccp.asp

 

[redpike]

Thanks Stivino - but, to be glaikit, how do I get to the rocker cover: how do you remove what I guess are inlet ducts going down the back of the block?


lang may thy lum reek tae

 

[Stivino]

To get to the rocker cover, you open the bonnet and it's staring yo uin the face. The plug leads go down through the middle of it. Ah cannae really think o the things yer cawin inlet ducts. And if yer that glaikit ye shouldnae be daen the plugs yersel.

 

[redpike]

The reason you don't recognise inlet ducts is that you're talking about the old micra engine where you could see the plug leads. If the plug leads were visible I wouldn't be asking the question! But then, if you'd read the question you wouldn't be answering the wrong one. And you needn't have taxed your brain thinking up such witty comments

 

[Stivino]

I do apologise for getting mixed up, I should have paid more attention to the model. Ok to get to the spark plugs on your model you have to wait for someone else to tell you because I can't be bothered. I really was trying to be helpful.
Oh and although you might have had to tax your brain to read something written in your mither tongue I can assure you it wasn't taxing for me to write it.

 

[redpike]

Hi Stivino

Thanks for your help, and it's guid tae see a wee bit o' Scots used.