Have an electric Mira Sport shower, older model, Just a dribble of water coming out. If you place finger over pipe with shower head off you can feel hot water or cold depending on setting. Is this a deceased shower or can it be fixed !!!
No water flow in Mira sport
- Thread starter Sidsolo
- Start date
Sponsored Links
Does this help?
//www.diynot.com/forums/viewtopic.php?t=64390&highlight=
//www.diynot.com/forums/viewtopic.php?t=64390&highlight=
In the mira sport at the top left were the water comes in you will find a gauze filter.
Isolate the water and electric supply, remove the brass cover and earth wire and clean out the filter.
Remove the shower head and descale, also try running the unit with the shower head removed to see if this alieviates the problem.
If non of the above cure the fault it would be likely that you have a faulty inlet solenoid.
This is the large white/beige or black plastic unit just to the left of the water feed, it as 4 small micro switches attached to it.
This unit can be purchased directly from Mira and replaced.
Isolate the water and electric supply, remove the brass cover and earth wire and clean out the filter.
Remove the shower head and descale, also try running the unit with the shower head removed to see if this alieviates the problem.
If non of the above cure the fault it would be likely that you have a faulty inlet solenoid.
This is the large white/beige or black plastic unit just to the left of the water feed, it as 4 small micro switches attached to it.
This unit can be purchased directly from Mira and replaced.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
