Help. I'm trying to find a sealing ring for a close coupled WC. No brand on the WC - all I can find is a manufacturing date of Oct 2000 and "Made in UAE" stamped in the cistern. The ring itself is essentially a foam/rubber donut with an OD of roughly 4" and an ID of roughly 2.25". This ring is pretty close in shape but the dimensions would appear to be wrong. A standard 1.5 seal is the wrong profile and too tall and the ID is too small. A 2" seal from B&Q is too big to fit into the recess of the pan. I've tried Plumb Base and Plumb Centre to no avail. Any help would be appreciated. Bucket flushing the WC is not going down well (pardon the bad pun - only sort I do).
non standard sealing ring for close coupled WC
- Thread starter arbitrary
- Start date
Sponsored Links
give us a pic of the old one.
Try http://www.lunns.net, they should be able to help you out
Sponsored Links
Thanks for that link - amazing selection of seals!
have you found one ?
The one described as "Close Coupled 98mm Donut Washer" on the Lunn's website looks like a very close match.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
