//www.diynot.com/network/ferris/albums/ - some photos of my solar panels and HW tank etc, plus a photo of the heating setup.
Hi,
I moved into this house three years ago. It had a 'working' Solar DHW system running with a 'out of the ark' gas heating/DHW system.
Long story but I now have a nice heating system installed, at the time I didnt have the energy or cash to finish the solar side of the system...
I have the old panels on the roof, and as everything was working well before the old system being dismantled so I am going to assume they are good to go. I have a Megaflo Eco Solar DHW cylinder.
The ‘system’ is now in the garage 100%, it used to be boiler in garage and tanks in the loft with a whopping 27m of 28mm between the two. For a nice neat install we decided on everything in the garage.
My thought is to get some of the flexible pipes with the outdoor insulation and temp sender cabling included, and run from the panels – outside of the building – and just drop down from the roof to the garage (see picture) – c4m, connect up to a pump station next to the cylinder etc etc.
I am a pretty compitant DIY’er (worked for a builder and a plumber a long time ago after leaving school) and would like to do this myself, plus also I am struggling to find any good local help to even get a price.
Could someone advise what needs to in the system to get everything working, and any thoughts or advice would be much appreciated.
Regards,
Mark
[/img]
Hi,
I moved into this house three years ago. It had a 'working' Solar DHW system running with a 'out of the ark' gas heating/DHW system.
Long story but I now have a nice heating system installed, at the time I didnt have the energy or cash to finish the solar side of the system...
I have the old panels on the roof, and as everything was working well before the old system being dismantled so I am going to assume they are good to go. I have a Megaflo Eco Solar DHW cylinder.
The ‘system’ is now in the garage 100%, it used to be boiler in garage and tanks in the loft with a whopping 27m of 28mm between the two. For a nice neat install we decided on everything in the garage.
My thought is to get some of the flexible pipes with the outdoor insulation and temp sender cabling included, and run from the panels – outside of the building – and just drop down from the roof to the garage (see picture) – c4m, connect up to a pump station next to the cylinder etc etc.
I am a pretty compitant DIY’er (worked for a builder and a plumber a long time ago after leaving school) and would like to do this myself, plus also I am struggling to find any good local help to even get a price.
Could someone advise what needs to in the system to get everything working, and any thoughts or advice would be much appreciated.
Regards,
Mark
[/img]