We were having low hot water pressure on bath tap only. Unvented Megaflo system. Checked TMV (Bossmix) looked OK, filters not blocked, so as it was 6 years old replaced with same model.
All fine, with good pressure, after replacement for just over a week then suddenly low pressure on bath hot tap again.
TMV is below bath taps, behind bath and very difficult to access so am hoping I don't need to take it out again.
Any ideas what might be causing this hot water lower pressure to one tap only?
Thanks in advance.
All fine, with good pressure, after replacement for just over a week then suddenly low pressure on bath hot tap again.
TMV is below bath taps, behind bath and very difficult to access so am hoping I don't need to take it out again.
Any ideas what might be causing this hot water lower pressure to one tap only?
Thanks in advance.