Pebble dash repair?

[tombodge]

Hi

Ive got some pebble dash I need to repair on my house.


Whats the best way to tackle this? Ive added some pictures below which shows it pritty well. If anyone could give me a nod in the right direction that would be great.

Tom

 

[roy c]

The Picture shows us nothing!! You will have to make yourself a bit clearer..

 

[tombodge]

Hi roy

I got some pics today. Im replacing the wood and im going to sort this out after the wood has gone back up.


The stuff that's left up there is prity solid and hard to break off

 

[roughcaster]

Sometimes with a job like that, rather than patch it in, you're better to scratch out the bare brickwork flush with the surrounding pebbledash,, let it set and cure, then coat and re-dash over the whole area. That way, it'll look good rather have it patched here and there. A good local builder/plasterer would do that in no time. It's not really a diy job, unless you have some idea what you're doing.

 

[tombodge]

Once ive put the wood back up can't I just spread some **** it the parts that have blown and chuck some of the same grade stone at it. Then paint it?

Its like 20+ foot up and almost level with the wood.


the parts that need doing are only small. the size of a A4 sheet of paper and smaller.

Could I

PVA it.

hit it with a layer of 3-1 portland sand and cement. Then a layer of 4.5-1 then chuck stones at it and paint?