Pine Floorboards as flooring - Good/Bad idea?

Joined
6 Sep 2016
Messages
159
Reaction score
4
Country
United Kingdom
I'm looking to install new flooring upstairs, not a fan of laminate and my budget doesn't quite stretches to oak parquet.
My local timber yard has some very nice redwood 20mm floorboards for sale at £8/m2 , I had bought a bit of them in past to use them for other purpose and I really liked how they came up after giving a good coat of oil.
They look nice and have tongue&groove all around, however I'm slightly worried about the durability I can expect from them since they are pine boards.

What do you say about this idea? Am I potentially asking for a trouble since I have dogs/ a lot of people in house who likes to drag chairs and come inside the house with dirty shoes which all could just stratch it all up due to it being a soft fresh pine?
Anyone got experience doing what I want to do?
 
Sponsored Links
structural flooring wont tend to have t&g all round it must start an finish on a joist to be structural will tend to be around 8ft -15ft with the odd length joined within a room but most will be full length perhaps 1 in 5max being 2 boards but never in general any more than one join on the length
but i always go for 100% full length as neater unless the extra 5% extra costs to cover waste is a big problem
 
Last edited:
Oiling them will result in a very soft easy marked floor but retouching it will be super straight forward. I have 70s pine floorboards which I sanded and waxed. I like the distressed look so want them to weather in. I simply add a coat of wax and they get better. They scratch and dent easily but as long as the colour doesn't show through I like it. 70s pine I probably a little harder than modern too so consider that.

2-3 coats of quality diamond varnish will keep them decent but they will dent easily which may crack the varnish layer allowing it to chip.

I also laid them in a spare bedroom for a friend and they stayed very good with a well varnish surface. Low traffic though obviously.

Overall if you like a distressed look go for it. If not I would avoid.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top