PIr lighting

[thekiltedscot]

Hi.

I Am replacing security lighting on outside of mothers garage to give some light in dark area when coming in/out. Current ones leak and blown.

All wired through garage, at moment have 2 separate pir floodlights working independent but changing to either a 2 pir floodlight or 1 pir floodlight and
Non pir floodlight each 230 w , but wires so
Both come on simultaneously, most probably the latter. All cable is going to be replaced .

The pir light has LNE And
L1, with no instructions on L1.

Have read so many posts I am
Confused how to wire so that both will come on together.

Any advice is most welcome

Thanks

Ks

 

[JohnW2]

changing to ... 1 pir floodlight and
Non pir floodlight each 230 w , but wires so Both come on simultaneously
The pir light has LNE And L1, with no instructions on L1.

Assuming than the non-PIR one has just LNE .... connect the supply to LNE of the PIR light in the normal way. Then have a cable from PIR light to non-PIR one, connecting L1, N and E of the PIR one to L, N and E respectively of the non-PIR one (no connection from L of the PIR one to the non-PIR one).
Others may well pop up with observations/questions about this work you intend to undertake.

Kind Regards, John.