Help my mixer tap is dripping, when i tried to replace the washers they aren't ordinary washers or o rings. The tap is a MFI mixer with 10mm feed pipes about 15 years old. Any suggestions where to get flatish o rings if you'll excuse my description
plumbing
- Thread starter whyme
- Start date
Sponsored Links
I expect you will end up replacing the taps!!!
Only if you have good names then you MAY get spares for 6-120 years if you are lucky.
Any unbranded taps and you have to replace unless you can match it with another ( cheap ) one.
Tony
Only if you have good names then you MAY get spares for 6-120 years if you are lucky.
Any unbranded taps and you have to replace unless you can match it with another ( cheap ) one.
Tony
Sponsored Links
most plumbers merchants keep a stock
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
