This is a trivial problem , but annoying none the less. We have a 6 month old pop-up basin waste in our bathroom. It's the one that you push to close and push to open again. It seems to be 'sagging' slightly which means that it doesn't drain as quickly as it used to. I can't seem to get into it to have a look at it. Does anybody know how to get them to bits?
Pop-up basin waste
- Thread starter lizzy
- Start date
Sponsored Links
normally the actual plug has a screw fitted to tjhe bottom.turn one way to lower the other way to raise.the plug should just pull straight out.
You can also try adjusting it from underneath the basin. You will see a chrome rod attached to another one with a small fitting. Undo this and slide up or down until you get correct operation 
Sponsored Links
Thanks for the replies fella's. Just to clarify the plug isn't one of those with the screw underneath that adjusts the height of the plug. I know the type you mean as we have one of those on the bath. It also isn't the type that has the rod that comes up through the head of the mixer tap. The plug says push on the top like this one:
http://www.smrbathrooms.co.uk/frame...throoms.co.uk/hud-r/accessories_waste_320.htm
http://www.smrbathrooms.co.uk/frame...throoms.co.uk/hud-r/accessories_waste_320.htm
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
