Positioning large wall tiles?

[RrogerD]

I'm using 600 square wall tiles around the bath, side and end. The height to ceiling to the side is 1.3m ie 2x tiles plus, 100mm. Am I best aesthetically, to split the difference, placing a 2" slither at both top and bottom or, keep a 4" (100mm) cut tile? That, being better along the bottom, bath edge or, along the ceiling?

What is the norm?

Thanks

 

[freddiemercurystwin]

I'd have the 100mm cut tile at the top.

 

[RrogerD]

I'd have the 100mm cut tile at the top.

This is what I'd originally planned for but then when it actually comes to it, I start to question myself.
Googling it, one option may be to straddle the centre-line with the one tile therefore requiring a 350 top and bottom or, a 300 top and a 400 bottom. Slightly more expensive though as will require three whole tiles for each vertically run rather than 2.5 per run with the initial idea.

 

[pcaouolte]

straddle the centre-line with the one tile therefore requiring a 350 top and bottom

This.