Potterton Performa 24, low water pressure form hot taps...

[dwebb2]

From all hot taps in the house, the hot water is coming out at a very low pressure. But is hot. The central heating is still working, when I try to add pressure to the boiler, by using the gauge, nothing happens to the pressure, as if not more water is getting added to the boiler.
Any ideas?

 

[Agile]

The mains supply in your area may have been reduced for maintenance or as a result of a fault or leak.

You should measure it as a start.

You have not mentioned the cold water flow! Is this reduced as well?

If not then there is a problem with your filling valve/loop and perhaps the water in filter in the boiler is blocked.

Tony

 

[dwebb2]

thanks for your reply. The cold water is fine, its just the hot water that is weak.

Dave

 

[Agile]

If not then there is a problem with your filling valve/loop and perhaps the water in filter in the boiler is blocked.

Tony

Bit of a coincidence though unless the boiler has generally not been maintained!

Tony