I have a powermax 135 (I know poor me) which has developed a lovely whistle that sounds like the noise produced when you rub the rim of a wine glass. This can be heard from outside flat and starts 10-20mins after firing up in the morning (I was away over w/e so had switched off and took 30 mins to start yesterday so suggests related to the water temp to me).
Have looked at a few of the posts on here and there seem to be 2 main possibilities - a gas/air valve that needs adjusting or kettling.
While the CH heats the radiators as soon as turned on, the water circuit has quite poor flow (in particualr the shower runs hot for only a couple of mins then goes cold) and as soon as more than one tap opened one stops immediately.
I had the CH system de-scaled about 3/4 years ago (for a small fortune) and recall that the engineer said they didnt deal with the water circuit side, is that right?
Have looked at a few of the posts on here and there seem to be 2 main possibilities - a gas/air valve that needs adjusting or kettling.
While the CH heats the radiators as soon as turned on, the water circuit has quite poor flow (in particualr the shower runs hot for only a couple of mins then goes cold) and as soon as more than one tap opened one stops immediately.
I had the CH system de-scaled about 3/4 years ago (for a small fortune) and recall that the engineer said they didnt deal with the water circuit side, is that right?