Prox tags on Texecom

[whyme!]

So I want to add some prox tags to my premier elite. However i can not find using the keypad anywhere that allows me to add a user/prox tag.
I see change code only
Nothing as shown here

 

[whyme!]

Confirm devices not activated, now works!

 

[secureiam]

prox tags have tobe learned against a user, can be set up by a master user or engineer in setup users

 

[whyme!]

prox tags have tobe learned against a user, can be set up by a master user or engineer in setup users

In my case i just never Confirmed devices so I could not get to the menu. now ok though thanks

@secureiam Can you only have one tag per user?

 

[secureiam]

It is better for security to have one tag per user.

 

[whyme!]

It is better for security to have one tag per user.

so does that other user require a different code?

 

[secureiam]

Yes, 1 user 1 code, 1 tag is recommended.

however you can share a code and duplicate a tag, but if its all separate it makes life easier if something goes wrong, its not as if there aren't plenty of user slots available.

 

[whyme!]

Yes, 1 user 1 code, 1 tag is recommended.

however you can share a code and duplicate a tag, but if its all separate it makes life easier if something goes wrong, its not as if there aren't plenty of user slots available.

Very true, I guess the wife can still use my code, but have her own for purposes of the prox tag. thank you