"bracket buffers" on panel radiator

[Muzz]

hi,

just bought a "flomasta" panel radiator from screwfix, it came with 4 "bracket buffers", plastic bits clipped onto the radiator. I assume these are to stop metal on metal noises as the metal expands and contracts.

i can't see how to fit these and still get the radiator to hook onto the wall brackets.

i've attached a picture to show them, with one of the wall brackets as well.

 

[Muzz]

rotate image 90 degrees anticlockwise to get it the right way up

 

[seco services]

take the black/yellow bits off they are not used when the rad is fitted.
in the bag of fixings will be 4 white clips that fit into the brackets that the rad sit on when fitted.

 

[45yearsagasman]

Those plastic bits are not required and in the accessory pack you will find some plastic insulating pieces which fit to the brackets in the little notches.

 

[Muzz]

yup, just came back to say when i opened the fixings bag i found some other bits and see you guys have posted the same.

what a numpty!!