I have a radiator that is cold, and I have bled it - cold, clear water comes through and hot water starts coming through the non-"thermostat" end. However, radiator still goes cold eventually!
If I shut off the non-thermostat end, no water comes out at all. A friend leads me to believe that this means that there is an air-lock in that pipe, which sounds reasonable.
The question is: how do I clear that air-lock?
If I shut off the non-thermostat end, no water comes out at all. A friend leads me to believe that this means that there is an air-lock in that pipe, which sounds reasonable.
The question is: how do I clear that air-lock?