I need to remove radiator in order to replaster wall,this radiator is one that does not have a TRV,but has isolating valves at each end.I also have another radiator of wall at present. Is there a set procedure for reinstalling/filling this radiator. ie the one with the isolating valves?
radiator removal
- Thread starter listerlad
- Start date
Sponsored Links
- Joined
- 19 Jul 2007
- Messages
- 5,949
- Reaction score
- 1,143
- Country
Turn valves back on and vent!!
(After refitting rad of course)
(After refitting rad of course)
Terrywookfit;- Sorry for appearing to be thick,but I take it that this rad gets closed off at both ends,removed to allow access to wall,replaced afterwards then reconnected, and refilled releasing any air.
- Joined
- 19 Jul 2007
- Messages
- 5,949
- Reaction score
- 1,143
- Country
Spot on!!
Dont forget to repressurise system if on a sealed system!!
ie: If you have no header tank!
Dont forget to repressurise system if on a sealed system!!
ie: If you have no header tank!
Sponsored Links
Terrywookfit Thanks for help that has cleared up the matter,much obliged.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
